Watts A2C-WB Bedienungsanleitung
Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für elektrische Watts A2C-WB herunter. Watts A2C-WB User Manual Benutzerhandbuch
- Seite / 8
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Watts IntelliFlow
®
Automatic Washing Machine Shutoff Valve
Model A2C-M1, A2C-WB-M1
Important! Read instructions completely before proceeding.
Note: This unit is not compatible with 240VAC powered wash-
ing machines or combination washer/dryers that are 240VAC
powered. A Watts A2-IntelliTimer (purchased separately) may be
used with the IntelliFlow
®
with washing machines or washer/dry-
ers that are 240VAC powered. (See page 5)
A2C-M1 IntelliFlow
®
Patent Number 6,003,536
Leak Sensor
IS-A2C-M1/A2C-WB-M1
*This valve requires a 120VAC, 60 Hz,
20 amp ground fault protected circuit.
*Ground Fault Interrupter – A GFI circuit is not required for
proper operation of the IntelliFlow
®
, but is strongly recom-
mended as a safety device.
Surge Protection – Although a surge protector is not
required for proper operation of the IntelliFlow
®
, it is strongly
recommended, especially in areas where power surges or
lightning strikes frequently occur.
Operating Instructions
The Watts IntelliFlow
®
Automatic Washing Machine Shutoff Valve is equipped with a
state-of-the-art electric current sensing device. When the washing machine is turned
on, the device senses current flow to the washing machine. This causes it to actuate
its solenoid water valves, allowing water to flow to the washing machine. When the
washing machine shuts off upon completion of the full wash cycle, the device senses
the lack of current and closes the water valves. The IntelliFlow
®
remains closed until
the next time you turn the washer on.
The leak sensor provides additional protection from water damage while the washing
machine is in operation. Water detected at the sensor results in immediate shut off of
water flow to the washing machine hose.
By installing an IntelliFlow
®
, you are protecting your home from potential major water dam-
age from a burst or leaking washing machine inlet hose.
Operating Specifications
Electrical Rating: 120VAC, 60 Hz
Circuit Breaker Requirements: 20A GFI*
Max. Appliance Current Rating: 15A
Current Draw: 20mA (with appliance off)
Electrical Cord: 6 ft. type SJT 14 AWG
Max. Temperature: 180°F (82°C)
Max. Pressure: 150psi (10.3 bar)
Valve Body: Reinforced Polysulfone
Rubber Goods: Buna-N, EPDM
*Ground Fault Interrupter – A GFI circuit is not required for proper operation of the
IntelliFlow
®
, but is strongly recommended as a safety device. In accordance with National
Electric Code, NFPA 70, Section 210.11 Branch Circuits Required, at least one 20-ampere
branch circuit shall be provided to supply the laundry receptacle outlets(s) required by
Section 210.52(F). This circuit shall have no other outlets.
*Surge Protection – Although a surge protector is not required for proper operation of the
IntelliFlow
®
, it is strongly recommended, especially in areas where power surges or lightning
strikes frequently occur.
Model
A2C-M1
from
washing
machine
Electrical
power source
ground fault
protected
Water supply
One for cold
One for hot
Model
A2C-WB
from
washing
machine
Electrical
power source
ground fault
protected
Water supply
One for cold
One for hot
Model A2C-M1
1
⁄2" solder connectors for exposed piping
Standardly furnished with
1
⁄2" solder copper
adapters. Either connection may be used for the
hot or cold water supply.
Model A2C-WB-M1
Includes wall mount box. Wall mount box has water
inlet connection holes spaced 2
3
⁄8" center to center.
Furnished with
1
⁄2" solder connectors. Either connec-
tion may be used for the hot or cold water supply.
IS-A2C-M1-A2C-WB-M1.qxd 6/22/09 2:30 PM Page 1
Inhaltsverzeichnis
Seite 1 - Watts IntelliFlow
Watts IntelliFlow®Automatic Washing Machine Shutoff ValveModel A2C-M1, A2C-WB-M1Important! Read instructions completely before proceeding.Note: This u
Seite 2
2Installing the A2C-M1 IntelliFlow®1. Shut off electrical power supply.2. Shut off both hot and cold water supply lines.3. If retrofitting to an exist
Seite 3 - Wall Box Unit (A2C-WB-M1)
ULRLISTED3P473WARNING:Power MUST be off during installation or servicing of the valve!IMPORTANT: Do not plug valve into supply circuituntil completion
Seite 4 - Calibration Procedure
4Installing the Watts Model A2-LS Leak SensorDescription:The Watts Model A2-LS Leak Sensor plugs into the receptacleon the front panel of the Watts In
Seite 5 - Typical Installation
5Accessories: Watts A2-IntelliTimerPush OnPush OffPower LampPower JackLow VoltagePower SupplyIntelliFlow®Power OutletIntelliFlow®Power CordIntelliTime
Seite 6 - Troubleshooting Guide
6PROBLEM SOLUTION1. No water flow from either hot or cold water supply hose: 1. Plug IntelliFlow®into electrical outlet.GREEN LED: OFF 2. Check electr
Seite 7 - Front Panel Status Indicators
Front Panel Status IndicatorsGREEN LED: ON: Unit powered This lamp is illuminated whenever the IntelliFlow®is plugged into a powered wall outlet.YELLO
Seite 8 - Retrofit Kit Options
IntelliFlow® Retrofit Kit OptionsIntelliFlow®Retrofit Installation Kit KA2-BDOrder No. 0004800These mounting kits are specifically used to install the
Weitere Dokumente für Zubehör für elektrische Watts A2C-WB
Watts A2C-WB Bedienungsanleitung
(2 Seiten)
Verwandte Produkte und Handbücher für Zubehör für elektrische Watts A2C-WB
(1 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 2.617 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern